BOAT RESCUE PART 4: LET THE RESTORATION BEGIN

(Previous: BOAT RESCUE PART 3: SO, WHAT DID I DRAG HOME?

The rescue of a 1976 Albin Ballad 30' sailboat

It's a relief to stop taking things off the boat and start some serious rebuilding work. One of the first jobs, after removing all the debris from the old ceilings, was to "de-glue" the hull sides. In places the old adhesive peeled off in sheets, partly due to the moist conditions in the boat. But most of it put up a good fight, and it took an assorted arsenal of tools to persuade it to let go.

Tool Arsenal

My main tools were a razor blade scraper, a wire brush, an old 1/2" chisel, gloves, and a kneeling pad. I found that if I kept the razor blade wet when scraping the glue did not re-stick to the fiberglass. Another useful tool was an abrasive pad, also kept wet. Even after it was all removed (two days work) little bits of rubbery glue were everywhere, trying their best to re-adhere to anything they came in contact with!

Wire Brush in Action

Working inside the bare hull was interesting: everything dropped immediately headed for the bilge, and unless I kept a grip on something I was apt to slide bilgeward also!

Most of the gear I removed was in decent shape. The winches, although dirty with debris, are in good working condition and should be fine after a good cleaning and lubrication.

Winch with Drum Removed.